聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
新聞資訊
使用石材雕刻機中散熱技巧
來源：http://m.yhuizhuanyao.com 時間：2020-11-03
購買雕刻機都有同樣感覺。 當雕刻機長時間使用時，會產生熱量。 此時，如果電機過熱，會產生一些負面影響。 我們應該考慮如散熱。 當石材雕刻機溫度過高時，您可選擇停止機器一段時間并繼續工作。 您還可電機內部添加熱輻射，確保及時釋放熱量。
I feel the same way when I buy engraving machines. When the engraving machine is used for a long time, it will produce heat. At this time, if the motor overheats, there will be some negative effects. We should consider heat dissipation. When the temperature of stone engraving machine is too high, you can choose to stop the machine for a period of time and continue to work. You can also add heat radiation inside the motor to ensure the timely release of heat.
冷 卻技巧：電加熱范圍取決雕刻機電機絕緣性。 通常，高溫（130度）內部絕緣被破壞。 只要不超過130度，電機就不會損壞，但此時表面溫度低90度。
Cooling technique: the electric heating range depends on the insulation of engraving machine motor. In general, the internal insulation is damaged at high temperatures (130 degrees). As long as it does not exceed 130 degrees, the motor will not be damaged, but the surface temperature is 90 degrees lower.
此，電動機表面溫度通常70-80度。 一個簡單溫度測量點溫度計很有用，你可大致確定：1-2秒手可觸摸，不超過60度，只需手觸，約70,80度; 幾滴水迅速蒸發，然后90度。
Therefore, the motor surface temperature is usually 70-80 degrees. A simple temperature measurement point thermometer is very useful, you can roughly determine: 1-2 seconds hands can touch, no more than 60 degrees, just touch, about 70,80 degrees; a few drops of water quickly evaporate, and then 90 degrees.
數控等離子切割機,雕刻機散熱非常重要。 常用被動散熱和空氣冷 卻。 對低功率機器，可使用被動散熱。 使用環境溫度和設備溫差，及自然冷 卻，相對簡單成本低。 適用低功率，短時工作設備冷 卻。
Numerical control plasma cutting machine, engraving machine heat dissipation is very important. Passive cooling and air cooling are commonly used. For low power machines, passive cooling can be used. The use of environmental temperature and equipment temperature difference, and natural cooling, relatively simple, low cost. Suitable for low power, short-term working equipment cooling.
空氣冷 卻更廣泛，并大多數使用這種方法來散熱。 風冷熱量使用風扇吹走熱量，便快速散熱。 然，空氣冷 卻存許多缺點。 例如，長時間工作，噪音確實非常大。 ，容易積聚灰塵，導致散熱不 好。
Air cooling is more extensive, and most use this method to dissipate heat. The air cooling heat uses the fan to blow away the heat, and then quickly dissipates heat. However, air cooling has many disadvantages. For example, if you work long hours, it's really noisy. It is easy to accumulate dust, resulting in poor heat dissipation.
使用石材雕刻機中散熱技巧
Heat dissipation technique in stone carving machine
水冷散熱發熱芯表面加入一個吸熱冷頭，它可流過水面，從消 除熱量，達到冷 卻效果。 或外面配備水冷裝置，工作方式前相同。 水冷 卻缺點成本高。 優點散熱效果非常好，不會受到灰塵干擾。
A heat absorbing cold head is added to the surface of the water cooling heating core, which can flow through the water surface to eliminate heat and achieve cooling effect. Or equipped with water cooling device outside, the working mode is the same as before. Water cooling has the disadvantage of high cost. The advantages of the cooling effect is very good, will not be disturbed by dust.
隨著大功率雕刻機增加，散熱問題日益嚴峻。 作散熱領域新趨勢，水冷散熱必發揮越來越重要作用。
With the increase of high power engraving machine, the problem of heat dissipation is becoming more and more serious. As a new trend in the field of heat dissipation, water cooling will play an increasingly important role.
- 上一篇：保麗龍雕刻機使用過程中需要注意的問題有哪些？
- 下一篇：五軸雕刻機正確的選型是關鍵詞
